Telephone
01248 811 413
Email
mail@abcstore.co.uk
Vetus bow thrusters are suitable for boats from 18' to 140'
in
length (5.5m to 43m). We are able to supply the complete
package,
including bow thruster motors, tubes, control panels
and wiring harnesses.
Also supplied are a range of commonly required service and
spare
parts, including Vetus bow thruster anodes, replacement
propellers, shear pins and drive pins.
The bow thruster motor is the heart of the system.
The new 6-blade propeller optimises the
performance of the motor, reduces cavitation
noise
and reduces current consumption by up to
10%.
In addition to the bow thruster motor,...
A GRP bow thruster tube should be used for
installation in fibreglass (GRP) or wooden boats.
Steel tubes may be welded into steel boats and
aluminium tubes are available on request.
The quoted diameter is that of the inside of th...
Control panels for bow thrusters can be supplied with
push-buttons or a joystick: these are available with
or without time delay. Wireless remote controls are
also available.
All panels are suitable for 12v or 24v operation and
...
Connection cable for bow and stern thrusters: connects the motor unit to the control panel.
The new 6-blade propeller is available as a spare part
in case of damage to the original, for example caused
by the bow thruster sucking in debris.
The 6-blade propeller can be retro-fitted to some old
Vetus bow thruster models w...
All Vetus bow thruster motors are fitted with a zinc anode, which requires replacing when worn in order to prevent electrolytic corrosion of the bow thruster gearbox.
Vetus electric bow thruster motors have a drive pin located behind the propeller, which may fracture if the propeller becomes jammed by debris: this will protects the motor. Similarly, some Vetus bow thruster motors have an additional shea...
View Basket
Recover Basket