Telephone
01248 811 413
Email
mail@abcstore.co.uk
Vetus hydraulic steering systems have been
produced for over 40 years and some of the earliest
systems sold are still in daily use.
Even with the best of care, the marine atmosphere
can cause some parts to require replacement and
so we offer a selection of spare parts for Vetus
hydraulic steering systems including seal kits, rod
ends and other sundry fittings such as olives,
supports and connectors.
| Spare parts for hydraulic steering systems | ||||
|---|---|---|---|---|
|
Vetus hydraulic steering fluid is a low
viscosity oil for hydraulic steering systems
with optimum performance at all
temperatures. This oil has a very low
coagulation point and a very high viscosity
index. May be mixed with other hydraulic
mineral oils. Colour: green Viscosity: 22 cSt at 20º C. Viscosity index: 353 Part reference: VHS1 |
|||
| RRP: | Our Price: £10.95 | |||
|
Stainless steel rod end for Vetus MTC30
hydraulic steering ram. M10x1.5 Part reference: HS071 |
|||
| RRP: | Our Price: £38.30 | |||
|
Stainless steel rod end for Vetus MTC52 and
MTC72 hydraulic steering rams. M12x1.75 Part reference: HS101 |
|||
| RRP: | Our Price: £48.00 | |||
|
Stainless steel rod end for Vetus MTC125 and
MTC175 hydraulic steering rams. M20x1.5 Part reference: HS101 |
|||
| RRP: | Our Price: £130.00 | |||
|
Rod end for Vetus MTC125 and
MTC175 hydraulic steering rams. M20x1.5 Part reference: HS889 (limited stock) |
|||
| RRP: | Our Price: £60.00 | |||
|
Rod end for Vetus MTC75 and
MTC80 hydraulic steering rams. M16 Part reference: HS842 (limited stock) |
|||
| RRP: | Our Price: £40.00 | |||
|
Nylon support base for MTC30 ram: this is
the part that attaches the ram to
the vessel and allows the ram to pivot/swivel.
Part reference: HS130 |
|||
| RRP: | Our Price: £17.50 | |||
|
Bleed tee-piece fitting for hydraulic rams MTC52,
MTC72, MTC125 & MTC175 with connection for
10mm hose and bleed fitting.
Part reference: HS868 |
|||
| RRP: | Our Price: £29.00 | |||
|
Pipe connection for 8mm Vetus hydraulic hose (6mm internal
diameter x 8mm external diameter) to 1/4" BSP thread (not pictured). Connects hose into the back of Vetus hydraulic steering pumps and also into MTC30 hydraulic cylinder. Part reference: HS1010MS - supplied as a pair of fittings |
|||
| RRP: | Our Price: £20.00 | |||
|
Sleeve insert 6mm for 8mm Vetus hydraulic
hose (6mm internal
diameter x 8mm external diameter). Suitable
for hydraulic systems
using MTC30 cylinder with MTP2008,
HTP2008, MTP3008 or
HTP3008 hydraulic helm pumps. (Sold
singly).
Part reference: HS1011 |
|||
| RRP: | Our Price: £0.60 | |||
|
Sleeve inserts 6mm and olives86mm for
8mm Vetus hydraulic
hose (6mm internal
diameter x 8mm external diameter). Suitable
for hydraulic systems
using MTC30 cylinder with MTP2008,
HTP2008, MTP3008 or
HTP3008 hydraulic helm pumps. This product consists of a pack of 10 sleeve inserts and 10 olives. Part reference: HS10131 |
|||
| RRP: | Our Price: £39.00 | |||
|
Pipe connection for 10mm Vetus hydraulic hose (6mm internal
diameter x 10mm external diameter) to 1/4" BSP thread (not pictured).
Connects hose into the back of Vetus hydraulic steering pumps. Part reference: HS1039MS - supplied as a pair of fittings |
|||
| RRP: | Our Price: £20.00 | |||
|
Sleeve insert 6.5mm for 10mm Vetus
hydraulic hose (6mm internal
diameter x 10mm external diameter).
Suitable for hydraulic systems
using MTC52, MTC72, MTC 125 & MTC175
cylinders. (Sold singly).
Part reference: HS145 |
|||
| RRP: | Our Price: £1.90 | |||
|
Olive 10mm (internal diameter) x 8.3mm
length for Vetus hydraulic
hose 10mm (6mm internal diameter x 10mm
external diameter). (Sold singly).
This olive should be used with the brass fittings (HS1039) on the rear of Vetus hydraulic helm pumps or in K30/140 non- return valve blocks only. It is is not suitable for use in hydraulic cylinders, bypass valves or tee-pieces, where HS897 should be used. Part reference: HS894 |
|||
| RRP: | Our Price: £2.50 | |||
|
Olive 10mm (internal diameter) x 10.4mm
length for Vetus hydraulic
hose 10mm (6mm internal diameter x 10mm
external diameter). (Sold singly).
This olive should be used with the chromed fittings on Vetus hydraulic cylinders, bypass valves or tee-pieces. It is is not suitable for use in Vetus hydraulic helm pumps or non-return valve blocks, where HS897 should be used. Part reference: HS897 |
|||
| RRP: | Our Price: £2.50 | |||
|
Copper washer for sealing pipe connectors into a Vetus hydraulic steering
pump. Suitable for fittings HS1010MS (8mm pipe) and HS1039MS (10mm
pipe).
Part reference: HS108 |
|||
| RRP: | Our Price: £0.60 | |||
|
Seal kit for Vetus MTP hydraulic steering
pumps, MTP20, MTP30, MTP42 & MTP53.
Includes rear gasket and shaft oil seal required to
rebuild the helm unit pump. The kit is suitable for versions with and without non- return valves, but there are no seals for the non return valve block included in the kit. MTP pumps were produced up to 2005 and can be identified by the mounting flange around the circumference of the pump body. Part reference: HS37N |
|||
| RRP: | Our Price: £12.00 | |||
|
Seal kit for Vetus HTP hydraulic steering pumps, HTP20, HTP30 & HTP42.
Includes rear gasket and shaft oil seal required to rebuild the helm unit
pump. The kit is suitable for versions with and without non-return valves, but there are no seals for the non return valve block included in the kit. HTP pumps were produced from 2005 and do not have a mounting flange around the circumference of the pump body. Part reference: SET0199 |
|||
| RRP: | Our Price: £27.50 | |||
)
|
Seal kit for Vetus hydraulic steering MTC30
ram. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS820 |
|||
| RRP: | Our Price: £35.00 | |||
)
|
Seal kit for Vetus hydraulic steering MTC52
ram. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS863 |
|||
| RRP: | Our Price: £65.00 | |||
)
|
Seal kit for Vetus hydraulic steering MTC72
ram. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS863 |
|||
| RRP: | Our Price: £65.00 | |||
)
|
Seal kit for Vetus hydraulic steering MTC125
ram. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS864 |
|||
| RRP: | Our Price: £68.00 | |||
)
|
Seal kit for Vetus hydraulic steering MTC175
ram. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Click the image to the left for a full dimensional drawing, which may help identification of a cylinder. Part reference: HS864 |
|||
| RRP: | Our Price: £68.00 | |||
|
|
Seal kit for Vetus hydraulic steering MT75 and MT80
rams. Includes
all seals and o-rings required to completely
rebuild this
cylinder. Part reference: HS822 |
|||
| RRP: | Our Price: £49.50 | |||
There are currently no reviews of this product.
View Basket
Recover Basket