Gas detectors and sensors

Large View

The Vetus gas and petrol vapour detectors model GD1000 and PD1000 offer a gas detection system for a range of combustible gasses. In addition they will also detect poisonous carbon monoxide.

A single sensor is supplied as standard and a second sensor can be fitted as an option, for detection in an alternative location.

If the detector senses high concentrations of gasses and/or carbon monoxide, it will trigger an acoustic alarm and a LED on the control panel will flash.

The instruments are provided with three switched connections rated at 1 Amp each, for actuation of an extraction ventilator, an external alarm or horn and a solenoid operated gas valve. The extraction ventilator can also be operated manually be means of the 'Fan' button.

The push button marked 'Valve' will manually actuate a remote solenoid operated gas valve, if this is installed in the system. If this solenoid valve is in the open position (or not fitted), the presence of gas is detected continuously. If the valve is closed, detection will take place intermittently. Please note, the valve itself is not supplied with the gas detector.

Should the supply voltage drop too low, an alarm will sound. A 'Test' button enables the correct operation of the unit to be tested.

Compare Products

	Price
Large View Gas & carbon monoxide detector with sensor GD1000 The Vetus gas detector model GD1000 offers a gas detection system for a range of combustible gases including propane, butane, methane and hydrogen. In addition it will also detect poisonous carbon monoxide. It is supplied with a single sensor is supplied as standard, which can detect both flammable gases (such as bottled gas) and carbon monoxide. A second sensor can be fitted as an option, for gas detection in a second location. Please note that petrol fumes can trigger the alarm at extremely low concentrations, which makes this device less suitable for boats with petrol engines. Voltage: suitable for 12v or 24v Relay contact ratings (fan, solenoid valve, external alarm): 1 Amp Control panel dimensions: 85mm x 85mm Bult-in depth: 40mm Sensor dimensions: 32mm x 26mm x 62mm	£375.00
Sensor for gas detector GSENSOR This sensor is suitable for Vetus gas detectors type GD1000. It is not compatible with older GD900 models. The sensor may be used as a replacement or as a second sensor for gas detection in a second location. The sensor is fitted with an LED which indicates when it has reached its maximum life span and should be replaced. Voltage: suitable for 12v or 24v Sensor dimensions: 32mm x 26mm x 62mm	£168.00
Large View Petrol vapour & carbon monoxide detector with sensor PD1000 The Vetus petrol vapour detector model PD1000 offers a gas detection system for petrol vapours and poisonous carbon monoxide. It is supplied with a single sensor is supplied as standard. A second sensor can be fitted as an option, for gas detection in a second location. Voltage: suitable for 12v or 24v Relay contact ratings (fan, solenoid valve, external alarm): 1 Amp Control panel dimensions: 85mm x 85mm Bult-in depth: 40mm Sensor dimensions: 32mm x 26mm x 62mm Please allow 10-14 days for delivery	£410.00
Sensor for petrol vapour detector PSENSOR This sensor is suitable for Vetus gas detectors type PD1000. It is not compatible with older GD900 models. The sensor may be used as a replacement or as a second sensor for gas detection in a second location. The sensor is fitted with an LED which indicates when it has reached its maximum life span and should be replaced. Voltage: suitable for 12v or 24v Sensor dimensions: 32mm x 26mm x 62mm Please allow 10-14 days for delivery	£197.00