Heat exchanger spares

Large View

Various spare parts are available for Vetus Diesel heat exchanger assemblies.

Spare parts include the o-rings, filler caps, heat exchanger housing, filler neck, covers, seals and gasket.

Compare Products

	Price
O-ring STM6113- Heat exchanger housing for the following Vetus Diesel engines: M2.02, M2.04, M2.13, M2.C5, M2.D5, M2.06, M2.18 M3.09, M3.28, M3.29 M4.15, M4.35, M4.17, M4.45, M4.55, M4.56 P4.17, P4.19 VH4.65, VH4.80 Please note that it is strongly advised that the heat exchanger tube stack is removed and checked at the end of the season; and any build-up of salt is removed to prevent potential corrosion issues. The heat exchanger should be reassembled using new two o-rings. Part reference: STM6113	£4.10
NEW filler / pressure cap 18-14715 New design filler / pressure caps for all M-Series, P- Series and VH-Series Vetus Diesel engines. Used on new engines since 2019. This cap is used for heat-exchanger cooled engines and keel-cooled engines, regardless of whether they have a calorifier or expansion tank fitted. The cap vents at 1.0 bar and a small length of pipe can be used to drain any coolant overflow into the bilge. This replaces STM9507 and STM1017 (which are no longer available) but MUST be used with the new-design filler neck - please order a filler neck as well if you require one. Part reference: 18-14715	£16.90
NEW filler neck 18-14649 New-design filler neck for heat exchanger for all M-Series, P- Series and VH-Series Vetus Diesel engines. Used on new engines since 2019. This version is for all engines, heat-exchanger or keel cooled, regardless of whether they have an expansion tank or calorifier fitted. This replaces STM3750 and STM1515 but MUST be used with the new-style black plastic filler cap. This should be ordered together with the new-type black filler cap if you are replacing the earlier metal caps. Product code: 18-14649	£15.90
Heat exchanger gasket STM6252 Gasket for heat exchanger for 2-cylinder Vetus diesel engines. Part reference: STM6252	£9.20
Injection bend gasket STM6152 Gasket between heat exchanger and injection bend for most Vetus Diesel 2- and 3-cylinder engine.	£4.30
Heat exchanger housing M2 STM6140 Heat exchanger housing for the following Vetus Diesel engines: M2.02, M2.04, M2.13, M2.C5, M2.D5, M2.06, M2.18 M3.09, M3.28, M3.29 M4.15, M4.35, M4.17, M4.45, M4.55, M4.56 P4.17, P4.19 VH4.65,VH4.80 The diagram shows the original design of heat exchanger: new heat exchangers may differ in appearance, but use the same parts to complete the installation. Please note that the heat exchange is supplied without the filler neck, which should be ordered separately. Part reference: STM6140 Delivery on this heat exchanger housing is approximately 10-14 days.	£415.00