Hydraulic steering accessories

If you require help in choosing the correct steering system, please contact us by email or call us on 01248 811 001

Large View

To complete the installation of a hydraulic steering
system, Vetus offer a number of accessories, including
tee-pieces, stainless steel recess flanges and bypass
valves.

Compare Products

	Price
Bypass valve 8mm BYPASS8 Bypass valve for hydraulic steering hose of diameter 6mm x 8mm.	£64.00
Bypass valve 10mm BYPASS10 Bypass valve for hydraulic steering hose of diameter 6mm x 10mm.	£76.00
Tee-piece 8mm HS211 Tee-piece for hydraulic steering hose of diameter 6mm x 8mm.	£12.50
Tee-piece 10mm HS213 Tee-piece for hydraulic steering hose of diameter 6mm x 10mm.	£14.50
Recess flange 38mm HTPF Stainless steel flange to recess a Vetus HTP hydraulic pump into the dashboard by 38mm. May also be used to fit a Vetus HTP hydraulic helm pump in place of an earlier type MTP pump.	£66.00
Recess flange 74mm HTPF2 Stainless steel flange to recess a Vetus HTP hydraulic pump into the dashboard by 74mm. May also be used to fit a Vetus HTP hydraulic helm pump in place of an earlier type MTP pump.	£86.00
Dual non-return valve K30/140B In a system where a single steering position needs to be upgraded to twin, or when an inboard automatic pilot is to be fitted - this dual non-return valve is required. This is not required for a dual helm steering position where both helm pumps have built-in non-return valves; or an autopilot system where the help pump(s) and autopilot pump have built-in non-return valves. Supplied with 6x ¼"BSP female threaded connections, ready for either a 6mm or 8mm connection kit (ordered separately).	£295.00
Dual non-return valve fitting kit 6mm KITK30 Fitting kit 6mm for dual non-return valve, to be used with K30/140. Suitable for steering systems with MTC3008 cylinder and HS04N 6mm x 8mm pipe. Consists of 6x ¼"BSP compression fittings for 6mm nylon hose (use with supplied inserts) with olives and copper washers, plus two blanking plugs.	£99.00
Dual non-return valve fitting kit 8mm KITK52175 Fitting kit 8mm for dual non-return valve, to be used with K30/140. Suitable for steering systems with MTC52, MTC72, MTC125 & MTC175 cylinders and HHOSE6 6mm x 10mm pipe. Consists of 6x ¼"BSP compression fittings for 6mm nylon hose (use with supplied inserts) with olives and copper washers, plus two blanking plugs.	£76.00